Salting bath for stainless steel wires
Cleaning baths in front of the temper annealing furnaces for stainless steel wires
Electrolytic zinc coating baths
Electrolytic acid or alkaline cleaning baths
Chemical Coppering baths
Electrolytic coppering baths for welding wires
Mechanical cleaning with pressure pads
Mechanical cleaning with cords
| Plant | Diameters | Thickness | Speed |
|---|---|---|---|
| Steel wires electrolytic zinc coating bath | 0,2-1,6 mm 1,6-3 mm 3-5 mm | 0,5-2 μ 0,5-3 μ 1-5 μ | 15 m/sec 8-10 m/sec 3-7 m/sec |
| Stainless steel welding wire cleaning | 0,8-1,6 mm | – | 15 m/sec |
| Multiwire stainless steel wire cleaning | 0,2-4 mm | – | 120 – 6 m/min |
| Multiwire stainless steel nickel coating | 0,2-4 mm | 0,5-2 µ | 100 – 5 m/min |
| Steel wires single wire cleaning and coppering | 0,6-1,6 mm | 0,5-1 µ | 20 – 25 m/sec |
| Steel wires single wire cleaning and coppering | 1,6-5 mm | 0,5-1 µ | 8 m/sec |
| Aluminium wire electrolytic cleaning | 0,8-2,4 mm | – | 15 m/sec |
| Aluminium wire ultrasound cleaning | 0,8-2,4 mm | – | 15 m/sec |
| Stainless steel salting bath | 2-8 mm | – | 3,5 m/sec |
When the wire does not perform as expected, the problem is rarely limited to a single step. More often, it is the result of accumulated variability across the process.
Drill deep holes with consistent diameters and straightness — critical in aerospace, automotive, oil & gas, and defense manufacturing.
Optimized coolant flow and quick change tooling reduce downtime and improve cycle time.
High tool life, efficient drilling strategies, and minimal defects contribute to lower total cost of ownership.
Capable of drilling steels, stainless steels, aluminum, titanium, and exotic alloys with superior results.
Contact NG-Tech now to improve immediately, reduce losses, and recover margin, stability, and efficiency.
CHIAMACI PER TUTTE LE INFORMAZIONI TECNOFILL +39 0445 641928